Alliance Laundry Systems F232198R4, Operation & Maintenance Manual

Page: 15 / 26

Operation
13
F232198 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions (Vend
Models)
NOTE: Opening the coin box while in Run Mode
and before a cycle has started will put control into
Audit Mode. Display will show “Audt”. To revert
back to Run Mode, close coin box and press START
keypad.
1. Turn on main power source (circuit breaker).
2. Push button and turn handle clockwise to open.
Refer to Figure 5 .
Figure 5
3. Load to capacity whenever possible. Refer to
Figure 6 .
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
Figure 6
4. Close door and turn handle counterclockwise
until button pops out. Refer to Figure 7 .
Figure 7
5. The default wash cycle will display.
NOTE: The default cycle is Normal/Cold (Domestic
Models) or Perm Press 60°C (International
Models) for coin models if no cycle is selected.
Refer to
Figure 8 .
Figure 8
U001I
U003I
U001I
U005I
CHM477R
CHM480R
To avoid personal injury, recommended
inlet water temperature should be no
higher than 125
°
Fahrenheit (51
°
Celsius).
W709
WARNING
CHM477R DOMESTIC MODELS
CHM480R INTERNATIONAL MODELS