Alliance Laundry Systems 801504R1, Installation Manual

Page: 16 / 78

Installation
801504
14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 6: Connect Dryer Exhaust System
For further assistance, refer to sections on Location
Requirements and Dryer Exhaust Requirements .
●
DO NOT use plastic or thin foil ducting.
●
Locate unit so exhaust duct is as short as
possible.
●
Be certain old ducts are cleaned before installing
your new dryer.
●
Use 4 in. (10.2 cm) diameter rigid or flexible
metal duct.
●
The male end of each section of duct must point
away from the dryer.
●
Use as few elbows as possible.
●
Use duct tape or pop-rivets on all duct joints.
●
Ductwork that runs through unheated areas must
be insulated to help reduce condensation and lint
build-up on pipe walls.
●
Failure to exhaust dryer properly will void
warranty.
Figure 14
NOTE: Venting materials are not supplied with the
unit (obtain locally).
A clothes dryer produces combustible lint.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
W116
WARNING
SWD449N
SWD449N
DO DON’T