46
503806
User-Maintenance
Instructions
·
Lubrication
All moving parts are sealed in a permanent supply of lubricant or are
equipped with oilless bearings. Additional lubrication will not be
necessary.
·
Care of Your Dryer
Clean the lint filter before drying each load. The lint filter may be
washed if needed. Occasionally remove the lint filter and vacuum the
area under it and the door liner interior above it.
Ordinarily, the dryer cylinder will need no care.
Wipe the dryer cabinet as needed. If detergent, bleach or other
washing products have been spilled on the dryer top, wipe
immediately. Some products will cause permanent damage if spilled on
the cabinet.
Do not lay sharp or rough objects on or against the dryer. The finish
could be damaged.
Use only a damp or sudsy cloth for cleaning the control panel. Some
spray prewash products may harm the finish on the control panel.
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation.
NOTE: The wiring diagram is located inside the control panel.
·
Exhaust System
The complete exhaust system should be inspected periodically and
cleaned as required by a qualified service person to remove any lint
build-up.
The weather hood should be checked frequently to make sure the
dampers move freely, dampers are not pushed in and that nothing has
been set against them.
Keep dryer area clear and free from combustible materials, gasoline
and other flammable vapors and liquids.
Do not obstruct the flow of conbustion and ventilation air.
NOTE: Verify proper operation after servicing.
a
CAUTION
