TMB2105N_SVG
1
1.
Switch Actuator
Figure 65
Loading Door Catch
The door catch must be adjusted to have sufficient tension to hold
loading door closed against force of load tumbling against it.
Proper adjustment is when 8-15 pounds [35.6N - 66.7N] pull is
required to open door.
If adjustment is required, refer to
lows:
1. Open door.
2. Loosen acorn nut.
3. Turn door strike screw in or out as required.
4. Tighten acorn nut.
T048I_SVG
2
3
1
1.
Door Latch
2.
Door Catch
3.
Acorn Nut
Figure 66
Drive Belt - Nonreversing Models
1. Remove guard from rear of tumble dryer.
2. To adjust belt tension, loosen idler housing bolts holding idler
housing assembly to the guide rails.
3. Position housing assembly by turning adjusting bolt until
proper belt tension is reached, then retighten idler housing
bolts.
4. Replace the guard on rear of tumble dryer.
TMB2412N_SVG
1
2
3
4
5
1.
Poly V-Belt (Self-Adjusting)
2.
Idler Housing Bolts (2)
3.
Adjusting Bolt
4.
Drive V-Belt
5.
Idler Housing Assembly
Figure 67
Drive Belt - Reversing Models
.
Adjustments
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
92
Part No: 70457901ENR15
Summary of Contents for 0904004427
Page 2: ......
