15
14)
Lay the 6 frame pad sections on the trampoline to create a full circle around the trampoline frame. Align pad sections so that the
end of each pad section lines up directly in-between each vertical leg. Bottom of pad will have button bungee t-anchors (as shown on
next page).
WARNING:
Trampoline use is not recommended without the frame
pad installed. The frame pad is designed to reduce the possibility of
injury by protecting the user from coming into contact with the frame
and springs of the trampoline. It is very important that you properly and secure-
ly attach the frame pad to the frame, and that it is in the correct position prior to
using the trampoline.
15)
Two pad connectors are used to connect adjacent pad sections together; one pad connector connects to the bottom of each pad
section and the second pad connector connects to the top of each pad section.
Pad connector
Ref. #7b
Pad connector
Pad connector
Frame pad section
Ref. #7a
End of pad sections
(where pad connectors will be)
Vertical legs
Assembly and Installation Instructions
