16
•
Switch the on/off switch on the handle bars to
ON.
•
Check that the engine on/off switch is set to
ON.
•
Set the engine throttle to the half way position.
•
Ensure that the fuel shut-off off tap (2) is set to the
ON
position.
•
Set the choke (1) to the
OFF
position.
•
Pull the starter handle (3).
If the engine fails to start within 3 pulls:
•
Move the choke to the
ON
position.
•
After the engine has started wait a few seconds then return the
choke to the off position.
•
Allow the engine to warm up before starting to use the mower.
Stopping the engine
•
To stop the engine, turn the on/off switch on the handlebars to
OFF.
•
The engine can also be stopped by turning the engine mounted on/off switch to the
OFF
position.
•
If either of these measures do not stop the engine it is possible to stop it by moving the fuel shut-off
tap to the
OFF
position. Note that the engine will not stop straight away.
1
2
3
Summary of Contents for C 34
