manualshive.com logo in svg

allen BDF6048B, Safety & Operation Manual, Page: 17 / 42

Share
Download
allen BDF6048B Safety & Operation Manual Download Page 17

053016

Page 17

SECTION 2

CONTROLS

Section 2

BOGIE WHEEL ASSEMBLY

PAVING CARRIAGE

ROLLER TAMPER

IDLE END

INSERTS

DRAG PAN

POWER UNIT

CONTROL PANEL

LEG

DRIVE END

POWER UNIT INSERT

PAVER COMPONENTS

A. Machine Frame

The 6048 Paver Frame is constructed from welded steel for maximum 

strength and light weight . Standard frame insert sections are 3, 6, 12, 

15, and 18 feet long. The machine can be extended to a maximum of 
120 feet. Consult the factory when spans are in excess of 120 feet. 

Special length insert sections are available and can be ordered from 
the factory . The machine is equipped with crown adjusting bolts at 
each insert joint . The machine has 6” diameter, heavy duty legs and 
hydraulically driven bogie travel assemblies . A variety of bogie wheel 
types and sizes are available from the factory . The machine direction 
is controlled by the dual chain controller located at the drive end of the 
machine . The machine automatically moves forward after each pass of 
the paving carriage .

B. Stationary Power Unit

Power is supplied by  a 23 .5 HP Kohler Gasoline Engine . The machine is 
equipped with a 12 volt electric starting system . All power functions are 

Components

hydraulically driven . The stationary power unit drives the Bogie Travel 
Wheels and the Carriage Travel Speed and Direction .

C. Paving Carriage

Power is supplied by a 23 .5 HP Kohler Gasoline Engine and with a 
12 Volt electric starting system . All power functions are hydraulically 
driven . The paving carriage is equipped with dual finishing rollers and 
dual augers suspended from a rigid, light weight tubular frame . The 
finishing rollers are mounted on a skewable turntable and automatically 

reverse rotation after each pass. The dual augers plow excess concrete 

forward while moving in either direction . The augers and the finishing 
rollers can be adjusted up and down for optimum performance . The 

paving carriage includes a single drag pan with a burlap texturing cloth.

D. Paver Options

The 6048 Paver can be equipped with a variety of optional components . 
Contact the factory for additional information .

Summary of Contents for BDF6048B











































Reviews:

No comments