allen AT-16, Operations & Parts Manual

Page: 34 / 104

056841 - 01/2013
SECTION 2
OPERATIONS
Page 2-4
Starting Instructions
Make sure that the parking brake is fully applied and in the locked position.
Make sure fuel valve is open on fuel tank.
Note: If engine is cold, move choke lever to close position. If engine is hot, set choke to open position.
Move the throttle lever slightly towards the bucket.
Pull the E-stop button out.
Turn the key switch to “ON” position.
Hold switch in “START” position until engine starts. Do not hold switch in “START” position for more
than 5 seconds.
Note: If the engine does not start, wait 10 seconds, and turn switch to “START” again.
When engine starts, allow switch to return to “ON” position.
As the engine warms up, gradually move the choke lever to the OPEN position.
Position the throttle lever to the maximum engine speed of 3600 rpm, release the parking brake and
move into operation.
Read the instructions in the Kohler engine manual located in the plastic tube on the front panel of the
machine. When using this machine in cold weather, always allow the engine to run at idle speed for at
least 5 minutes to warm the engine and hydraulic oil to operating temperatures.