allen AT-16 Operations & Parts Manual Download

Page: 59 / 104

056841 - 12/2012

SECTION 4

PARTS

Page 4-3

Replacement Parts Procedures

We recommend AEC quality replacement parts, available from the AEC Customer Service Department

or your nearest AEC Dealer.

Part numbers are subject to change without notice. Part numbers might be different outside of the

United States of America. Use part numbers listed in the applicable parts list table when you place your

order. If a part number changes, the AEC Customer Service Department or your nearest AEC dealer

will have the latest part number for the replacement part.

Remember when you order replacement parts, you will need your model number and serial number.

These are the numbers that you have recorded in the UNIT ID section of this manual. Please order

replacement parts by the appropriate part number, not the key number.

This manual contains an illustrated parts list for help in ordering replacement parts for your machine.

Follow the instructions below when ordering parts to insure prompt and accurate delivery:

All orders for service parts - include the serial number for the machine. Shipment

will be delayed if this information is not available.

Include correct description and part number from the “PARTS” Section 4.

Specify exact shipping instructions, including the preferred routing and complete destination

address.

DO NOT return parts to AEC without receiving written authorization from AEC. All authorized

returns must be shipped pre-paid.

When placing an order, please contact the AEC Dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

Summary of Contents for AT-16









































































































Search results

Summary of Contents for AT-16

Reviews:

Related manuals for AT-16

Brands by name

Popular brands

allen AT-16, Operations & Parts Manual

Search results

Summary of Contents for AT-16

Reviews:

Related manuals for AT-16

Brands by name

Popular brands