background image

p

0

If not used correctly 

this lawn mower can be 

dangerous; it can cause 

serious injury to the 

operator and others. 

The warnings and safety 

instructions must be 

followed to ensure 

reasonable safety and 

efficiency.

The operator is 

responsible for 

following the warning 

and safety instructions 

in this manual and on 

the lawn mower.

Instructions:

Read the instructions carefully. Familiarise yourself with the controls and with the 
correct operation of the equipment. Never allow the mower to be used by children or 
by persons who are unfamiliar with these instructions.
Never mow when people, and in particular children or animals, are in the vicinity

.

 

Always remember that it is the operater who is responsible for accidents or injuries 
caused to other people on his property.
 
Never operate the lawnmower when you are tired, ill or under the influence of 
alcohol, drugs or medicine.

Preparation:

Do not use a metal/bar blade as a cutting mechanism on this machine; use only the SAFEWAY 
or CLEAN CUT safety blade mower head device approved by Allen Power Equipment.
Use safety glasses while operating this machine.
Safety shoes with spikes and steel toes must always be worn while operating this 
machine.
The use of ear protection is recommended.

Use:

1) 

Never operate the machine with a damaged enclosure deck.

2) 

Do not operate the engine in a confined space, where exhaust fumes (carbon monoxide) could accumulate.

3) 

Use the mower only in daylight or under good artificial lighting.

4) 

The use of the equipment on grass that is wet should be avoided where possible.

5) 

Always ensure that your feet have a good grip when working on slopes.

6) 

Do not walk backwards when in use; you could trip. WALK - DON’T RUN. 

7) 

Take great care when cutting on slopes - see figs 20, 21 & 22.

8) 

Exercise great care when changing directions on slopes.

9) 

Use the mower with the greatest of care, when pushing it. Never pull it when cutting the grass. [fig. 19]

10) 

To stop the engine, move the throttle control lever to stop position. [fig. 13]

11) 

The cutters must be stopped if the mower is to be transported over areas without grass, and when it is

            being brought to the area which is to be mown.
12) 

Never vary the settings of the engine speed regulator or run the engine at an excessive speed. 

            This is dangerous and shortens lawnmower life.
13) 

Exercise care when starting the engine, keeping feet and hands well away from the cutting area.

14) 

When starting the engine do not tilt the mower more than necessary and raise only the part which is

            furthest from the operator. [fig. 12]
15) 

Do not put hands and feet near or beneath the rotating components.

16) 

NEVER lift or carry the unit when the engine is running.

SAFETY PRECAUTIONS

This product must only be used for cutting grass.

Note:

Stop the engine and disconnect the sparking plug lead: 

[figs 13 & 10]

a. 

before cleaning out any obstructions, 

b. 

before checking, cleaning or repairing the mower,

c. 

after having collided with a foreign body (inspect the unit for any damage, and repair before re-starting.),

d. 

if the mower begins to vibrate in an abnormal manner (a check must be made immediately).

e. 

before leaving the mower unattended;

f. 

before refilling the fuel tank; 

g. 

before adjusting the height of the cut.

           Remember! Blades continue to rotate for a short time after the engine has been turned off.

Summary of Contents for 418H

























Reviews: