manualshive.com logo in svg

allen 060800, Operations & Parts Manual

Introducing the Allen 060800 Operations & Parts Manual - your go-to resource for maximizing the potential of your Allen product. This comprehensive manual is available for free download at manualshive.com, providing you with invaluable insights and step-by-step instructions to enhance your user experience.

Share
Download
background image

061090 - 12/2013

SECTION 3

SERVICE

Page 3-9

70000-43081

Refer to the chart on page 3-4 for engine fuel 

fi

 lter change schedule. Refer to your engine 

manual for speci

fi

 c details to perform this operation.

Check the oil and fuel lines and connections regularly for leaks or damage. Repair or replace 
as necessary.

Replace the oil and fuel lines every two years to maintain the line’s performance and 

fl

 exibility.

Radiator/Cooling System

1. Check and clean radiator 

fi

 ns.

2. Check cooling water.
3. Check radiator hoses for fatigue or cracking.
4. Check radiator cap seal.
Refer to your engine manual for additional information.

Engine Fuel Filter

Summary of Contents for 060800



















































































































Reviews:

No comments

Related manuals for 060800

Brands by name

Popular brands

Load more brands