5
3a
3b
4
3a. WOOD: Locate the open holes for mounting at the corners of the
mounting plate (A) and drill 1/8 in. pilot hole in the center. If a wooden
stud is encountered, use the wood screws (BB) and washers (CC)
provided to secure the mounting plate directly to stud.
3b. DRYWALL:If no stud is encountered, place the drywall anchors (DD)
in the pilot holes and screw them into place until flushed with surface
of drywall. Place washer (CC) over the mounting hole and drive long
screws (BB) into drywall anchor until snug. DO NOT OVERTIGHTEN.
NOTE: Main support for mounting plate (A) is electrical box when it is
secured properly. If the electrical box is not properly secured, alternative
mounting methods such as toggle bolts (not included) should be used
to secure mounting plate.
4. Hold LED Panel (C) up to secured mounting plate (A) and attach
the support wire hooks (B) from the backside of fixture to the specially
designed slots in the mounting plate (A) to temporarily hold fixture for
wiring.
A
A
A
C
B
Hardware Used
Hardware Used
BB
BB
CC
CC
DD
Wood Screw
Qty. 4
Wood Screw
Qty. 4
Washers
Qty. 4
Washers
Qty. 4
Washers
Qty. 4
BB
BB
BB
CC
CC
DD
DD
CC
CC
BB
B
B