4–8
Configuring Your DeviceNet Adapter Online
Publication 17946.5.5 - October 1996
Configuring Your Adapter's Flex I/O System
Configure your Flex I/O system by specifying the Flex I/O module
that will reside in each slot. Remember, slot 0 is the closest slot to
the adapter, and slot 7 is the furthest or last slot.
1.
Click on the or on the list box for
slot 0. A list of modules is displayed.
Use the up/dwn arrows to view the
entire list of modules.
2.
Use the up/down arrows to page thru
the possible module selections. Select
the desired module by clicking on that
selection.
1a
1
2
1a
Select the modules you want inserted into each slot in your Flex I/O
system. In the example, the following selections were made:
Example
This adapter example has 4 of 8 slots
filled with modules.
1. Click in the list box to select the
module for that slot.
1
You can configure each module:
•
as you enter it, by clicking on the slot number in the configure
column
•
or fill all the slots with your selections and go back and configure
them all at one time using “Save to Flex I/O.”