Getting Started with ProcessLogix R300.1
5
Publication 1757-QS030A-US-P - March 2000
Verify the ControlNet nodes using NTOOLS:
To view chassis configuration click on Start
⇒
Programs
⇒
ProcessLogix
Engineering Tools
⇒
NTOOLS.
Click OK.
Click on NetworkTools
⇒
Settings.
Select the Ping radio button.
Click OK.
Click on NetworkTools
⇒
Ping.
Click on 01 Series R CNI. Set the number of slots in Local Chassis Settings to
match your chassis size (this is a one-time setting), and click OK.
Verify that all I/O modules appear as configured in the chassis.
Exit NTOOLS by clicking on NetworkTools
⇒
Exit.
Starting the ProcessLogix server
The ProcessLogix Server program is the operating system for the ProcessLogix
server. To start the server:
Click on Start
⇒
Programs
⇒
ProcessLogix Server
⇒
Start-Stop
ProcessLogix Server.
On the dialog box that appears, click on the Start button. (If server is already
started, skip to next section).
A dialog box asking you if you are sure you want to start the server appears.
Click on Yes.
TIP
You may experience a delay while the system launches all
server tasks and services.
Allen-Bradley Drives