2-2
Start Up
PowerFlex 40 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22B-UM001I-EN-E
Applying Power to the Drive
❏
6. Apply AC power and control voltages to the drive.
❏
7. Familiarize yourself with the integral keypad features (see
)
before setting any Program Group parameters.
If a fault appears on power up, refer to
Fault Descriptions on page 4-3
for an explanation of the fault code.
Start, Stop, Direction and Speed Control
Factory default parameter values allow the drive to be controlled from
the integral keypad. No programming is required to start, stop, change
direction and control speed directly from the integral keypad.
Important: To disable reverse operation, see
[Reverse Disable].
Changing the Speed Reference of an IP66, NEMA/UL Type 4X rated
drive
When a Display Group parameter, for example,
[Output Freq] is
[Speed Ref] is set to
[Internal Freq], you can
change the internal frequency using the Up Arrow and Down Arrow
keys.
When the internal frequency is being adjusted, its value is displayed and
the Hertz LED flashes. Any changes are saved immediately. The display
then returns to the Display Group parameter previously shown.
TIP: By default, the speed reference of an IP66, NEMA/UL Type 4X
rated drive is set to the internal frequency,
[Internal Freq].
FAULT
VOLTS
AMPS
HERTZ
RUN
FWD
REV
PROGRAM
VOLTS
AMPS
HERTZ
22B-UM001.book Page 2 Tuesday, May 30, 2017 5:22 PM
Aotewell Ltd
www.aotewell.com Industry Automation
HongKong|UK|China [email protected]
+86-755-8660-6182
