Allen-Bradley POINT I/O PROFIBUS 1734-APB, User Manual, Page: 63 / 88

1 Publication 1734-UM005B-EN-P - June 2001
Appendix
A
Specifications
Specifications - 1734-APB PROFIBUS Adapter Module
Communication Interface Specifications
Expansion I/O Capacity Up to 13 modules (13 times 75mA = 0.975, just under the limit
of 1.0A). The actual number of modules can vary. Add up the
current requirements of the modules you want to use to make
sure they do not exceed the amperage limit of the 1734-ADN.
(Note: Total expansion up to 63 modules - 13 modules maximum
with 1734-APB - add 1734-EP24DC modules for an additional 17
modules (or less based on current requirements), up to 63
module maximum)
Cat. No. PointBus Current Requirements
1734-IB2 75mA
1734-IB4 75mA
1734-IV2 75mA
1734-IV4 75mA
1734-OB2E 75mA
1734-OB4E 75mA
1734-OW2 80mA
1734-IE2C 75mA
1734-OE2C 75mA
1734-IE2V 75mA
1734-OE2V 75mA
1734-IA2 75mA
1734-IM2 75mA
1734-OA2 75mA
1734-IJ2 160mA
1734-IK2 160mA
1734-IR2 220mA
1734-IT2 175mA
1734-VHSC5 180mA
1734-VHSC24 180mA
Module Location Starter module - left side of 1734 system
Power Supply Specifications
Power Supply Note: In order to comply with CE Low Voltage Directives (LVD),
you must use either a NEC Class 2, a Safety Extra Low Voltage
(SELV) or a Protected Extra Low Voltage (PELV) power supply to
power this adapter.A SELV supply cannot exceed 30V rms, 42.4V
peak or 60V dc under normal conditions and under single fault
conditions. A PELV supply has the same rating and is connected
to protected earth.
Input Voltage Rating 24V dc nominal
10-28.8V dc range
Field Side Power Requirements 24V dc (+20% = 28.8V dc maximum) @ 400mA maximum
Inrush Current 6A maximum for 10ms
PointBus Output Current 1A maximum @ 5V dc ±5% (4.75 - 5.25 )
Input Overvoltage Protection Reverse polarity protected
Interruption Output voltage will stay within specifications when input drops
out for 10ms at 10V with maximum load.
Specifications continued on next page .
Allen-Bradley HMIs