GuardShield™ Type 2 Safety Light Curtain Installation Instructions
23
R
Original instructions
Document Control Number: SEN-0351-C-EN
1 / 2
EC Declaration of Conformity
The undersigned, representing the manufacturer
and the authorised representative established within the Community
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
USA
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products:
GuardShield™ Type 2 Safety Light Curtains
Product identification (brand and
catalogue number/part number):
Allen-Bradley / GuardShield 440L Series
(reference the attached list of catalogue numbers)
Product Safety Function:
440L Series Type 2 safety light curtains are active optoelectronic protection devices (AOPD’s)
with a resolution of 30mm. These safety light curtains are suitable for applications up to
Safety Category 2 and PLd (EN ISO 13849-1) and SIL2/SILCL2 (EN 61508/EN 62061).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions
contained in the product documentation:
2004/108/EC
EMC Directive
2006/42/EC
Machinery Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 55022:1998 +A1:2000 +A2:2003
Information technology equipment – Radio disturbance characteristics – Limits and methods of
measurement
EN 61496-1:2004 + A1:2008
Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and
tests
CLC/TS 61496-2:2006
IEC 61496-2:2006
Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular requirements for
equipment using active opto-electronic protective devices (AOPDs)
EN 61508-1:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 1:
General requirements
EN 62061:2005
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable
control systems
EN ISO 13849-1:2008 / AC:2009
Safety of machinery – Safety related parts of control systems – Part 1: General principles for design
The authorised representative is authorised to compile the Technical File.
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery Directive has been
certified by:
TÜV NORD CERT GmbH
Langemarckstr. 20,
D-45141 Essen, Germany
ID-No.: 0044
EC Type Examination Certificate No.
44 205 10 383326 001
Manufacturer:
Authorised Representative in the Community:
Signature
Signature
Name:
Daniel L. Nachtigall
Name:
Viktor Schiffer
Position:
Technical Leader - Certification Engineering
Position:
Engineering Manager
Date:
14-Apr-2011
Date:
20-Apr-2011
Place:
Milwaukee, WI, USA
Place:
Haan, Germany