Allen-Bradley Guardmaster, User Manual

Page: 13 / 100

Rockwell Automation Publication 440R-UM013E-EN-P - March 2017 13
Chapter
2
Installation
All safety relays in this manual have the same dimensions ( Figure 2 ).
Mounting Dimensions
Figure 2 - Dimensions [mm (in.)]
DIN Rail Mounting and
Removal
Safety relays mount onto 35 mm DIN rails: 35x7.5x1 mm
(EN 50022-35x7.5).
1. Hold the top at an angle ( Figure 3 ).
2. Slide down until the housing catches the rail.
3. Swing the bottom down and push until the latch clips onto the rail.
Figure 3 - DIN Rail Mounting
Removal
To remove a safety relay, use a screwdriver to pry the DIN rail latch downwards
until it is in the unlatched position. Then, swing the module up.
113.6 (4.47)
119.14
(4.69)
22.5
(0.88)
DIN Rail Latch
DIN
Rail