Publication 1784-6.5.30 - February 2001
Creating and Running a SoftLogix 5 Application
B-11
Running the Example
Program
Perform the following steps to run the program and test your network.
1.
After the download is complete, go
online
and put the SoftLogix
controller into
Run
mode.
2.
Press and release the
START
button on the RediSTATION. The red
light should turn on. On your screen, you should see rung 0 in
your ladder program become energized as you press the button.
3.
Pass your hand back and forth over the photoeye several times.
On your screen you should see the counter incrementing.
4.
Press and release the
STOP
button on the RediSTATION. The red
light should turn off. On your screen, you should see rung 2 in
your ladder program being energized as you press the button.
This completes the SoftLogix 5 example application
.
Summary of Contents for DeviceNet 1784-PCIDS
