Allen-Bradley DeviceNet 1784-PCIDS, User Manual, Page: 56 / 101

Publication 1784-6.5.30 - February 2001
4-18 Configuring the DeviceNet Network
4. Select the Output tab.
5. Highlight the RediSTATION and click on the AutoMap button.
In this example, the output to the RediSTATION appears in the
Output Image File as Word 0, bits 0-7. Recall from chapter 2 that
the indicator light is output bit 0. Therefore, the address for the
RediSTATION’s indicator light is:
Word 0, bit 0
6. Note the output mapping assigned to this output in your
system. You will need this mapping for your application. (See
Appendix B for an example of using this mapping in a SoftLogix 5
program.)
Output Image File,
Word 0
After Automapping, the output
byte of the RediSTATION will
appear here.