Allen-Bradley DeviceNet 1784-PCIDS, User Manual, Page: 34 / 101

Publication 1784-6.5.30 - February 2001
3-4 Setting Up the Hardware for the Example Network
3. Insert the DeviceNet connector into the five-pin header.
4. Apply power to the DeviceNet network, and turn on the computer
to make sure it powers up correctly.
5. Replace the CPU cover (when computer comes up correctly).
This completes the installation of the 1784-PCIDS card. Refer to
chapter 4 for information on configuring the 1784-PCIDS driver
software.
IMPORTANT
If the computer does not power up correctly, check
to make sure that the card is correctly inserted into
the slot. Also check the computer’s BIOS settings
(Interrupts, etc.) to make sure the card is not in
conflict with another device.
Module label shows
wiring color scheme