1786-5.7 - February 1999
ControlNet Coax Tap
5
Mounting a Tap Using a
Universal Mounting Bracket
1. Align the universal mounting bracket with the mounting holes on the tap.
2. Using screws provided with the tap, attach the tap to the universal
mounting bracket.
3. Mount the tap and bracket assembly to:
Use only the screws that are packaged with the tap. They are the proper length and head style.
universal mounting bracket
(provided with tap)
Y-tap
dust cap
universal mounting
bracket
T-tap
dust cap
20080-M
20084-M
!
ATTENTION: Do not over tighten the screws. Over
tightening the screws can damage the tap. The applied torque
should be 0.2-0.4 N-m (1-2 ft.-lbs).
Mount the universal bracket on specified Allen-Bradley mounting rails or DIN rails #3 style symmetrical (35 X 7.5mm)
universal mounting bracket
DIN rail
suitable fixture
universal mounting bracket
Type of rail
Cat. No.
Type of rail
Cat. No.
A-B rail
1492-N1
Din Rail #3
199-DR1
1492-N22
1492-DR5
1492-N44
1492-DR6
1492-DR7
Use four screws to attach the
universal mounting bracket to
another surface
a DIN Mounting Rail
or
another mounting surface
20082-M
20081-M
AB Parts
