1786-5.7 - February 1999
6
ControlNet Coax Tap
Mounting a Tap Through Body Holes
Mount the tap to a suitable fixture using:
Important: The suitable fixture can be conductive and/or grounded because
of the electrical isolation provided by these body holes.
Specifications
The following table lists the specifications for the ControlNet taps.
body holes
body holes
tie wrap
screws and flat washers
You can use a variety of screw types.
a tie wrap
or
screws and flat washers
(not supplied)
41645
41646
!
ATTENTION: Do not over tighten the screws. Over
tightening the screws can damage the tap. The applied torque
should be 0.2-0.4 N-m (1-2 ft.-lbs). Do not use screws larger
than #8 in these holes.
Operating temperature
-0 to 60°C (32 to 140°F)
Storage temperature
-40 to 85°C (-40 to 185°F)
Relative humidity
5 to 95% noncondensing
