Rockwell Automation Publication 5069-IN003C-EN-P - December 2016
7
5069 Compact I/O EtherNet/IP Adapters
Adapter Dimensions
5069-AEN2TR Adapter Dimensions
5069-AENTR Adapter Dimensions
Ground Considerations
You must ground DIN rails according to the Industrial Automation
Wiring and Grounding Guidelines, publication
1770-4.1
You can use the following DIN rails with the adapters:
• EN50022 - 35 x 7.5 mm (1.38 x 0.30 in.)
• EN50022 - 35 x 15 mm (1.38 x 0.59 in.) - 5069-AENTR only
98.10 mm
(3.86 in.)
137.84 mm
(5.43 in.)
123.00 mm
(4.84 in.)
143.97 mm
(5.67 in.)
136.81 mm
(5.39 in.)
130.31 mm
(5.13 in.)
101.66 mm
(4.00 in.)
ATTENTION:
This product is grounded through the DIN rail to
chassis ground. Use zinc-plated chromate-passivated steel DIN
rail to assure proper grounding. The use of other DIN rail
materials (for example, aluminum or plastic) that can corrode,
oxidize, or are poor conductors, can result in improper or
intermittent grounding. Secure DIN rail to mounting surface
approximately every 200 mm (7.8 in.) and use end-anchors
appropriately. Be sure to ground the DIN rail properly. Refer to
Industrial Automation Wiring and Grounding Guidelines,
Rockwell Automation publication
1770-4.1
for more information.
R
R
2
1
56.00 mm
(2.20 in.)
132.40 mm
(5.21 in.)
123.00 mm
(4.84 in.)
139.00 mm
(5.47 in.)
105.30 mm
(4.15 in.)
98.80 mm
(3.89 in.)
59.56 mm
(2.34 in.)
