manualshive.com logo in svg

Allen-Bradley Compact I/O 5069 series, Installation Instructions Manual

Share
Download
Allen-Bradley Compact I/O 5069 series Installation Instructions Manual Download Page 5

Rockwell Automation Publication 5069-IN003C-EN-P - December 2016

5

5069 Compact I/O EtherNet/IP Adapters

About the Adapters

5069-AEN2TR Adapter

5069-AENTR Adapter

WARNING: 

• If you connect or disconnect wiring while the field-side power is on, an electric arc can occur. This could cause an explosion in hazardous location installations. 

Be sure that power is removed or the area is nonhazardous before proceeding.

• When used in a Class I, Division 2, hazardous location, this equipment must be mounted in a suitable enclosure with proper wiring method that complies with 

the governing electrical codes.

• 5069-AEN2TR EtherNet/IP adapter only:

– When you insert or remove the SD memory Card while power is on, an electric arc can occur. This could cause an explosion in hazardous location 

installations. Be sure that power is removed or the area is nonhazardous before proceeding.

– When you press the reset button while power is on, an electric arc can occur. This could cause an explosion in hazardous location installations. Be sure that 

power is removed or the area is nonhazardous before proceeding.

WARNING: 

Do not use the USB port in hazardous locations. (5069-AEN2TR EtherNet/IP adapter only.)

IMPORTANT

Any illustrations, charts, sample programs, and layout examples shown in this publication are intended solely for the purposes of example. Since there are 
many variables and requirements associated with any particular installation, Rockwell Automation does not assume responsibility or liability for actual use 
based upon the examples shown in this publication.

DIN Rail Latches

Status Indicators

SD Card Slot

Reset Button

Four-character 
Display

Module Power and 
Sensor/Actuator 
Power Status 
Indicators

MOD Power RTB

SA Power RTB

USB Port

Rotary Switches

Ethernet ports 1 and 2 (on bottom of the adapter)

IMPORTANT

: Port 1 is the front port and port 2 is the rear port.

MOD Power Bus 
Connector

SA Power Bus 
Connector

DIN Rail Latch

Status Indicators

Module Power and 
Sensor/Actuator Power 
Status Indicators

Rotary switches 
(on side of adapter)

Power RTB

Ethernet port 2 (on bottom of the adapter)

MOD Power Bus 
Connector

SA Power Bus 
Connector

Ethernet port 1

Summary of Contents for Compact I/O 5069 series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands