Allen-Bradley Compact I/O 1769-ADN DeviceNet, User Manual

Page: 53 / 204

Publication 1769-UM001B-EN-P - October 2002
Configuring Your Compact I/O Series A DeviceNet Adapter 3-3
Follow these guidelines when listing devices:
•
List devices in the order in which they reside in the bank, from
left to right.
Note: The Series A adapter must be in slot 0 of bank 1.
•
Only enter cables in the first bank they reside in.
•
Be sure to enter all devices in their proper location, including
power supplies, cables, and the end cap.
•
Refer to the Configuration Rules for the Series A Adapter on
page 3-7.
Follow these directions to add each module, power supply, cable, and
end cap to Bank 1.
1. In the field labelled “Empty”, choose your module, power
supply, or cable from the pull-down menu.
Notice that this field is now called Slot 1 if an I/O module was
selected. This slot-numbering scheme will continue for each I/O
module you add to the configuration.
Note : Power supplies and cable are not assigned slot numbers.
Allen-Bradley