Allen-Bradley Compact GuardLogix 5380 Original Instructions Manual Download Page 18

Page: 18 / 116

Rockwell Automation Publication 1756-RM012B-EN-P - April 2018

Chapter 2

GuardLogix Controller System

Power Supply

For Functional Safety applications, SELV/PELV-listed power supplies are

required for both module power (MP) and sensor/actuator (SA) power.

Consider the following when you choose a power supply:

• The MP power of the Compact GuardLogix 5380 controller must be

• All local 24V DC safety I/O must be powered by a SELV/PELV-listed

power supply.

• If the SA power connector of the Compact GuardLogix 5380

controller is used, it must be powered by a 24V DC SELV/PELV-listed

power supply.

• If local 120/240V AC I/O are used in the Compact GuardLogix 5380

chassis, their 120/240V AC I/O SA power must be connected to a

catalog number 5069-FPD module.

• If any standard I/O are used that are not powered by a SELV/PELV-

listed power supply, their I/O power must be connected to a catalog

number 5069-FPD module.

Network Communication

This section provides examples of network communication configurations.

EtherNet/IP Network

The GuardLogix 5580 controller connects directly to an EtherNet/IP network

through the onboard Ethernet port and supports 10/100/1000 MBps network

speeds. A separate Ethernet communication module is not required, but can be

used in the local chassis.

Contact your local Rockwell Automation sales office or Allen-Bradley

distributor for other communication interface modules are available for use in

the GuardLogix 5580 system.

Peer-to-peer safety communication between GuardLogix controllers is possible

via the EtherNet/IP network. GuardLogix controllers can control and

exchange safety data with Safety I/O devices on an EtherNet/IP network, via

the onboard Ethernet ports or EtherNet/IP bridges.

IMPORTANT

For more information on how to power the 5069 platform when a

CompactLogix or Compact GuardLogix Controller is present, see the
CompactLogix 5380 and Compact GuardLogix 5380 User Manual, publication

5069-UM001

Summary of Contents for Compact GuardLogix 5380





















































































































Search results

Summary of Contents for Compact GuardLogix 5380

Reviews:

Related manuals for Compact GuardLogix 5380

Brands by name

Popular brands

Allen-Bradley Compact GuardLogix 5380, Original Instructions Manual

Search results

Summary of Contents for Compact GuardLogix 5380

Reviews:

Related manuals for Compact GuardLogix 5380

Brands by name

Popular brands