Allen-Bradley 8720MC, User Manual, Page: 98 / 128

98 Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
Chapter 7 Configure Parameters
Table 28 - Default Settings of All Parameters
Parameter
Number Parameter
Number
Parameter Name Setting Range Default Value
User Setting
Setting Date
User
Parameters
U.000 Unit Selection 275…750V 750V
U.001 FWD Current Limit 0…150% 150%
U.002 REV Current Limit 0…150% 150%
Factory
Parameters
F.000 Password 0…999 0
F.001 Unit Selection
• 065.b
• 130.b
• 190.b
• 195.b
• 380.b
• 570.b • 65 Amps
• 130 Amps
• 190 Amps
• 195 Amps
• 380 Amps
• 570 Amps
F.002 Rated Current
• 065.b: 10…70A
• 130.b: 20…140A
• 190.b: 30…210A
• 195.b: 30…215A
• 380.b: 60…430A
• 570.b: 90…645A • 065.b: 65 Amps
• 130.b: 130 Amps
• 190.b: 190 Amps
• 195.b: 195 Amps
• 380.b: 380 Amps
• 570.b: 570 Amps
F.003 Current Control Proportional Gain 0.01…10.0 times 1.00 times
F.004 Current Control Integral Gain 1.0…3000 rad/s 64 rad/s
F.005 Voltage Control Proportional Gain 0.01…30.0 times 5.00 times
F.006 Voltage Control Integral Gain 1.0…3000 rad/s 128 rad/s
F.007 Bus Overvoltage Detection Level 325…900V 800V
F.008 Bus Low Voltage Detection Level 200…700V 400V
F.009 AC Overvoltage Detection Level 200…550V 550V
F.010 Carrier Frequency 5, 10, and 15 kHz
• 10 kHz: 8720MC-RPS065
• 5 kHz: 8720MC-RPS190
F.011 Deadtime 1.5…15.0 μs 6.0 μs
F.012 Allowable Time for Instantaneous Power Loss 0.05…3.00 s 0.50 s
F.013 AC Reactor Capacity 100…8,000 μH See previous section
F.014 Precharge/Discharge Time 0.5…30.0 s 3.0 s
(3)
F.015 Wattage of Precharge/Discharge Resistor 50…2,000 W See previous section
F.016 DC Bus Voltage Offset
(1)
0.900…1.100 1.000
F.017 Discharge Function Enable
(1)
OFF, ON ON
F.018 Version Information – –
F.019 Selecting of Wiring Error (LE) Detecting Function
(2)
OFF, ON ON
(1) These parameters are available from only software version 2.00 or later.
(2) This parameter is available only from software version 3.00 or later.
(3) This parameter must be set to 15.0 seconds for the 8720MC-RPS190 unit.