Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
7
Preface
This publication provides detailed installation instructions for mounting and
wiring your 8720MC-RPS regenerative power supply, line reactor, harmonic
filter, varistor, and EMC line filter. Also provided are startup and programming
procedures for your 8720MC-RPS regenerative power supply installation.
This manual is intended for engineers or technicians directly involved in the
installation, wiring, startup, and programming of the 8720MC-RPS power
supply and accessories.
If you do not have a basic understanding of 8720MC-RPS regenerative power
supply, contact your local Rockwell Automation sales representative for
information on available training courses.
Summary of Changes
This manual contains new and updated information as indicated in the
following table.
Conventions Used in This
Manual
These conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural steps
• Numbered lists provide sequential steps or hierarchical information
• Throughout this publication the Bulletin 8720MC regenerative power
supply is also referred to as the 8720MC-RPS unit
Topic
Page
Combined the features of series # and series B units into a single manual.
Throughout
Added 8720MC-RPS Series Change.
Added Electrical Noise Reduction.
Updated EMC Directive. and Low Voltage Directive.