86
Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
Chapter 7
Configure Parameters
Table 26 - Parameter Information
The parameter structure is shown in the following figure.
Figure 46 - Parameter Structure
Attribute
Description
Parameter number
A unique number is assigned to each parameter. The number is preceded by either
U or F to identify it as a User or Factory parameter, respectively. The parameter
number is shown on the display of the operation panel.
Parameter name
A name is assigned to each parameter. The parameter name is not displayed when
programming the 8720MC-RPS unit.
Parameter description
This is a description of the parameter's function.
Parameter range
This shows the predefined upper and lower limits of the parameter value.
Default setting
Parameters are initially set at the factory, and that is the default setting.
Parameter type
The parameter type identifies whether the parameter can be modified at any time,
is protected by password, or cannot be modified during operation.
Refer also to Parameters
This shows a list of associated parameters that can provide additional or related
information.
8LU
OIPL
SELF
AC Input
Current
U.———
U.000
7
5
0
AC Input
Power Voltage
DC Bus
Voltage
Power
U.001
150
U.002
150
Load Ratio
F.———
F.000
0
F.001
065.b
F.019
On
Err
9HU
PRG
ENT
ENT
PRG
PRG
PRG
ENT
ENT
PRG
ENT
ENT
PRG
ENT
ENT
PRG
ENT
PRG
ENT
ENT
PRG
ENT
ENT
PRG
ENT
ENT
PRG