Allen-Bradley 6176M-15PN, User Manual

Page: 14 / 52

14 Rockwell Automation Publication 6176M-UM001D-EN-P - December 2012
Chapter 2 Installation
Required Tools These tools are required for installation:
•
Panel cutout tools
•
#2 Phillips torque screwdriver
Mounting Clearance
Requirements Review the monitor dimensions to make sure you allow adequate clearance
around the monitor for ventilation and cable connections.
IMPORTANT
Do not operate the monitor in an enclosure that uses minimum clearances
unless adequate ventilation or other cooling methods are used to maintain
the monitor temperature at its specified rating.
The ambient temperature around the monitor must not exceed the operating
temperature specified in
Table 13 on page 42 .
Item Monitor Location Clearance, min
1 Top 77 mm (3 in.)
2 Side (both) 50 mm (2 in.)
3 Back 50 mm (2 in.)
4 Bottom 50 mm (2 in.)
2
1
3
4