H,410**+,<)1=/)$IJK#LM
!"#$%&'()
3–9
You use switch 6 of SW-3 to set local/remote operation. Use the table
below as a guide to setting this switch:
*G(M@A(#'&([,.+/(%"&(0123456(
%@(!@++&8%>
7&%(79.%8"(R(%@>
A68E21/3)63)61=/3)+,1/**+</,1)%!#&'&#(
7/G+A/)16)0):010);+<=>0?)@*24),/1>63-
*6A0*)867/):R"5)QR5T
:010);+<=>0?)@*24),67/)Q42A=)04)0)@C(#KT
04)0)4*0G/)6,)0)82*1+736E)*+,-X)24+,<)0
867/8)Q.+<Y)&YKT
3/861/)867/)P@)QRSST
1>6):010);+<=>0?)@*24),/1>63-4)6G/3)0
E6+,1#16#E6+,1)867/8)*+,-)Q.+<Y)&YFT
3/861/)867/)P@)QRSST
Communications to a 1785-KE Series A is the same as that to a 1785-KE
in local mode (i.e., when the 1785-KE Series B is in local mode, it
functions the same as a 1785-KE Series A). As a result:
Important:
If you are replacing a 1785-KE Series A with a 1785-KE
Series B and desire Series A compatible operation, set the Local/Remote
option switch to Local.
See Chapter 5 for more information on selecting this option.
79.%8"(:,,&;<-=(7L4Q
Switch assembly SW-4 is reserved for future use. Set the switches in the
UP position (figure 3.7).
?./A'&()E1
79.%8"(:,,&;<-=(7L4Q