Allen-Bradley 1606-XLC, Reference Manual, Page: 1 / 26

Reference Manual
Bulletin 1606 Switched Mode Power Supplies
Catalog Number: 1606-XLE480FP
Index
e g a P e g a P
1. Intended Use .......................................................3
2.
Installation Requirements...................................3
3.
AC-Input...............................................................4
4. DC-Input...............................................................5
5.
Input Inrush Current ...........................................5
6 . Output ................................................................. 6
7. Hold-up Time.......................................................8
8. DC-OK Relay Contact ..........................................8
9. Efficiency and Power Losses................................9
10. Lifetime Expectancy and MTBF.........................10
11. Functional Dia g ram...........................................10
12. Terminals and Wirin g ........................................11
13. Front Side and User Elements...........................12
14. EMC....................................................................13
15. Environment ......................................................14
1 6 . Protection Features ...........................................15
17. Safety Features ..................................................15
18. Dielectric Stren g th ............................................1 6
19. Certifications......................................................1 6
20. Physical Dimensions and Wei g ht ..................... 17
21. Accessories ........................................................ 18
21.1. 1 6 0 6 -XLC Wall Mountin g Bracket......... ...18
22. Application Notes............................................. 19
22.1. Peak Current Capa b ility ...........................19
22.2. Back-feedin g Loads ..................................19
22.3. External Input Protection .........................20
22.4. Output Circuit Breakers ............................20
22.5. Parallel Use to Increase Output Power ....21
22. 6 . Parallel Use for Redundancy ....................21
22.7. Series Operation .......................................22
22.8. Inductive and Capacitive Loads ................22
22.9. Char g in g Batteries ....................................23
22.10. Operation on Two Phases ........................23
22.11. Use in a Ti g htly Sealed Enclosure ............23
22.12. Mountin g Orientations ............................24
• PE and symbol— PE is the abbreviation for P rotective E arth and has the same meaning as the symbol .
• Earth, Ground— This document uses the term “earth” which is the same as the U.S. term “ground”.
• T.b.d.— To be defined, value or description will follow later.
• 3AC 400V— A figure displayed with the AC or DC before the value represents a nominal voltage with standard tolerances (usually ±15%)
included. E.g.: DC 12V describes a 12V battery whether it is charged (13.7V) or discharged (10V).
• 230Vac— Afigure with the unit (Vac) at the end is a momentary figure without any additional tolerance included.
• 50Hz vs. 60Hz— Unless otherwise stated, AC 230V parameters are valid at 50Hz mains frequency.
• may— A key word indicating flexibility of choice with no implied preference.
• shall— A key word indicating a mandatory requirement.
• should— A key word indicating flexibility of choice with a strongly preferred implementation.
Terminology and Abbreviations