ALLEN & HEATH xDR-16 Getting Started Manual Download Page 2 | Manualshive

Page: 2 / 40

background image

iLive

Fixed Format Getting Started Guide

2

AP7141 iss.6b

ALLEN

&

HEATH

System operating firmware

The feature set of the iLive system is determined by the firmware (operating software) that runs it.

Firmware is updated regularly as new features are added and improvements made, and is
available for download from the Allen & Heath web site. This guide relates to

Version 1.9

firmware. Some of the details shown in this guide may differ from those in the current firmware
release. Refer to the web site for the latest version and read the Release Notes that come with
each version of firmware for further details.

Note:

Make sure all your iLive MixRacks, Surfaces and xDR expanders are running the same

version of firmware, and that the Editor software, MixPad and Tweak apps are compatible. xDR-
16 expanders loaded with V1.9 firmware are not compatible with V1.8 or earlier iLive hardware.

This user guide

This guide provides information on the fixed format iLive system.

Further information

For further information, refer to the user guides associated with each system component.

iDR MixRack Getting Started Guide AP7445

and

xDR-16 Getting Started Guide AP8331

present further information on the iDR-16, iDR-32, iDR-48 and iDR-64 fixed format MixRacks and

the xDR-16 Input/Output expander. Use the

HELP MANUAL

available from the iLive Surface

TouchScreen

UTILITY

menu and within the

Editor

software. Visit the

Allen & Heath web site

for

the latest information on iLive and additional resources for download.

The iLive range of products complies with the European
Electromagnetic Compatibility directives 2004/108/EC and
the European Low Voltage Directives 2006/95/EC.

Any changes or modifications to the equipment not approved by Allen & Heath could
void the compliance of the product and therefore the users authority to operate it.

iLive Fixed Format Systems Getting Started Guide AP7141 Issue 6b

Copyright © 2013 Allen & Heath. All rights reserved

Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK

http://www.allen-heath.com

«
1
2
3
4
...
»

Summary of Contents for xDR-16









































Reviews:

No comments

Related manuals for xDR-16

Brand: Valcom Pages: 2

Brand: Valcom Pages: 2

ex-tend-it DVI-CAT5

Brand: Gefen Pages: 2

Brand: Pro 2 Pages: 5

Brand: DVIGear Pages: 10

Brand: Dosel Pages: 10

Blend Force LH4358S0

Brand: OBH Nordica Pages: 52

Brand: Oster Pages: 22

Brand: CYP Pages: 68

Brand: Amped Wireless Pages: 86

EPB-2572 SERIES

Brand: Elite Products Pages: 18

Brand: Omcan Pages: 28

Brand: Currys Essentials Pages: 2

Brand: Concept2 Pages: 48

Brand: Kitchen Living Pages: 24

Brand: CableTronix Pages: 14

Brand: cable matters Pages: 8

CT-HDVD-EXT-IR230

Brand: Cable-Tronix Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands