ALLEN & HEATH xDR-16 Getting Started Manual Download Page 17

Page: 17 / 40

iLive

Fixed Format Getting Started Guide

AP7141 iss.6b

A 1/3 octave 28-band

GEQ

(graphic equaliser) is provided for each of the 32 mix outputs.

Constant-Q

Symmetrical cut/boost where the width (Q) of

the filter is a constant 1/3rd octave for any amount of cut or
boost.

Proportional-Q

Provides smooth wide Q for low cut/boost,

which progressively tightens beyond 1/3rd octave for max
boost/cut.

Digi-Q

Gain and width are optimised to minimise band

interaction and to provide a frequency response as close to
the slider positions as possible.

Hybrid

Allen & Heath have developed the best of both

worlds. The boost is proportional-Q for smooth and warm
small boost settings. The cut is Constant-Q providing

clinical 1/3rd Octave attenuation with minimal band
interaction.

GEQ on faders

Press a mix master

SEL

key to access the processing for

that master. The GEQ is controlled from the screen or on the
faders by pressing the Surface

GEQ FADER FLIP

key.

Press again to toggle between frequency banks and return
to normal fader mode.

In GEQ Fader Flip mode

- The EQ frequencies are indicated

on the strip LCDs above. The strip meters display the RTA
(PAFL signal if one is selected). The red PK meters display
the dominant frequency if this option has been set in the

SURFACE / Preferences

screen.

The fader on the right becomes the master or currently

active send level for the mix. Hold down

ALT VIEW

display the EQ dB settings on the strip LCDs. Press the strip

SEL

keys to reset individual frequency bands to 0dB.

Frequency response

shows the combined

response of the slider settings. Can show the

response differences between the four GEQ
models.

RTA display

with Peak Band follows the PAFL

signal. Go to

SURFACE SETUP / Preferences

/ Surface

to turn the Peak Band display option

on or off.

Frequency bands

can be adjusted by touching

and dragging the sliders or turning the screen
Rotary control.

GEQ Fader Flip

to display and control the

frequency bands using the faders.

GEQ Mode

to choose one of four models that

emulate classic equaliser types plus a unique
hybrid response type:

Low frequency bands

31, 40 and 50Hz added in V1.9.

GEQ Fader Flip key

Mix master strip – Master fader or channel send level depending on active

MIX

key

Press

SEL

key to reset a band to ‘0’

Summary of Contents for xDR-16









































Search results

Summary of Contents for xDR-16

Reviews:

Related manuals for xDR-16

Brands by name

Popular brands

ALLEN & HEATH xDR-16, Getting Started Manual

Search results

Summary of Contents for xDR-16

Reviews:

Related manuals for xDR-16

Brands by name

Popular brands