ALLEN & HEATH xDR-16 Getting Started Manual Download Page 18

Page: 18 / 40

iLive

Fixed Format Getting Started Guide

AP7141 iss.6b

Step 6 – Work with the mix

MUTE

SEL

MIX

PAFL

Press a strip

MIX

key.

The current mix status is displayed in the lower
part of the strip LCDs. Mix sends are presented
on faders or encoders. The current mix selected

is displayed in the lower status bar of the screen.

Note

– Make sure you are working with the

correct mix. After making your adjustments
remember to turn off the

MIX

key or return to your

main mix. Turning off the MIX key automatically
returns to the main mix.

There are two ways to work with the mix:

Press a master strip

MIX

key

Its sources are presented across the channel strips.

Assign channels to the master

To assign individual channels, hold down the

ASSIGN key then press channel

MIX

keys. To assign all, hold down ASSIGN then press the

mix master

MIX

key. The ON icon displays in the LCD for assigned channels.

Set pre or post fader

To set individual sends pre or post-fade, hold down the

PRE/POST key and then press channel

SEL

keys. To set all, hold down PRE/POST and press

the mix master

SEL

key.

Adjust the send levels

Aux, FX and matrix mixes can be configured for sends on

faders or rotaries. For groups and DCAs (no send levels), the assignments are displayed on
the LCDs. The faders and encoders remain unaffected.

Adjust the image

Use the encoders to adjust Pan for stereo or multi output main mix

type. Hold down ROTARY SHIFT and turn the encoders to adjust the second image control if
one is available, for example LCRplus Blend, Sub or M fill level, or encoder mix Pan.

IEM2

AUX

FADER

STEREO

SEL

MIX

AUX

PRE

PAN

AUX

PRE

PAN

AUX

PRE

PAN

AUX

PAN

ASSIGN

PRE/POST FADE

ASSIGN

PRE/POST FADE

ROTARY SHIFT

SEL

MIX

SEL

MIX

SEL

MIX

SEL

MIX

AUX

PRE

PAN

LEV

FADER

Mix sends (Aux, FX, Matrix) may be
configured in the

ROUTING

screen as

fader or rotary sends.

Fader sends

Faders = Sends

Encoders = Pan (if a stereo send)

Rotary sends

Faders = Channel

(trim) Encoders = Sends
Shifted encoders = Pan

Current mix status

= channel is

assigned

PRE

= Channel

send is set pre-

fader.

Master

MIX

view

- All sends to one master

MASTER

Summary of Contents for xDR-16









































Search results

Summary of Contents for xDR-16

Reviews:

Related manuals for xDR-16

Brands by name

Popular brands

ALLEN & HEATH xDR-16, Getting Started Manual

Search results

Summary of Contents for xDR-16

Reviews:

Related manuals for xDR-16

Brands by name

Popular brands