IP6 Getting Started Guide
13
AP10352 Issue 4
5.4
Programming the Remote Controller
Use the AHM System Manager software, dLive Surface / Director software, or Avantis
mixer / Director software to configure the controller as appropriate.
With dLive, the IP6 can be set to link to either the
MixRack
or the
Surface
. This is
regardless of the physical Network connection, for example the unit might be physically
connected to the MixRack but set to link to the Surface. Linking to the MixRack provides
an independent Remote Controller that can be used with or without Surface connection.
Linking to the Surface adds the ability to assign extra functions to the IP6 SoftKeys such
as
Sel
and
Mix
.
The functions and assignments of the IP6 are stored in the dLive / Avantis Scenes or
AHM Presets. They are not stored locally on the Remote Controller.
Refer to the mixer or AHM processor guides available for
