ALLEN & HEATH IP6 Getting Started Manual Download Page 2

IP6 Getting Started Guide 

AP10352 Issue 4 

 

Limited One 

Year Manufacturer’s Warranty

 

 

Allen  &  Heath  warrants  the  Allen  &Heath  -branded  hardware  product  and 

accessories  contained  in  the  original  packaging  ("

Allen  &  Heath  Product

”) 

against  defects  in  materials  and  workmanship  when  used  in  accordance  with 

Allen & Heath's user manuals, technical specifications and other Allen & Heath 

product  published  guidelines  for  a  period  of  ONE  (1)  YEAR  from  the  date  of 

original purchase by the end-user purchaser ("

Warranty Period

"). 

This  warranty  does  not  apply  to  any  non-Allen  &  Heath  branded  hardware 

products or any software, even if packaged or sold with Allen & Heath hardware. 
Please refer to the licensing agreement accompanying the software for details of 

your rights with respect to the use of software/firmware 

(“EULA”).

 

Details of the EULA, warranty policy and other useful information can be found 

on the Allen & Heath website:   

www.allen-heath.com/legal

 

Repair or replacement under the terms of the warranty does not provide right to 

extension or renewal of the warranty period. Repair or direct replacement of the 

product  under  the  terms  of  this  warranty  may  be  fulfilled  with  functionally 

equivalent service exchange units. 
This warranty is not transferable. This warrant

y will be the purchaser’s sole and 

exclusive remedy and neither Allen & Heath nor its approved service centres shall 

be liable for any incidental or consequential damages or breach of any express 

or implied warranty of this product. 
 

Conditions Of Warranty 

 

The  equipment  has  not  been  subject  to  misuse  either  intended  or  accidental, 

neglect, or alteration other than as described in the User Guide or Service Manual, 

or approved by Allen & Heath.  
Any  necessary  adjustment,  alteration  or  repair  has  been  carried  out  by  an 

authorised Allen & Heath distributor or agent. 
The defective unit is to be returned carriage prepaid to the place of purchase, an 

authorised  Allen  &  Heath  distributor  or  agent  with  proof  of  purchase.  Please 

discuss  this  with  the  distributor  or  the  agent  before  shipping.  Units  returned 
should be packed in the original carton to avoid transit damage.  
DISCLAIMER: Allen & Heath shall not be liable for the loss of any saved/stored 

data in products that are either repaired or replaced. 
Check with your Allen & Heath distributor or agent for any additional warranty 

information which may apply. If further assistance is required please contact Allen 

& Heath Ltd. 

Summary of Contents for IP6
















Reviews: