3 Operation
© 2022 Interflex Datensysteme GmbH | IF-261 Cabinet Lock | 06.22
24
3 Operation
The following sections describe the operation of the IF-261 Cabinet Lock. The technical basics can
be found in the separate document
Interflex Offline Components
u
Hold the credential in front of the lock.
If the credential is authorized, the LED will flash green briefly and the lock is opened.
Depending on the configuration, the Cabinet Lock is automatically locked after the closing time has
elapsed or it remains unlocked until a new booking is made.
If the bolt is blocked, e.g., due to the door not being fully closed, it retracts again.
3.1 Opening a door
To open a door that is secured with, hold the credential in the read area of the component.
Depending on the configuration, the lock is automatically locked after the closing time has
elapsed or it remains unlocked until a new booking is made.
LEDs and tone indicate the status of the booking:
Visual signal
Audible signal
Description
Green Configurable using the door initialization
card (flag
sound during motor
)
Credential authorized
3 × red
3 x
Credential blacklisted, credential
no longer valid or booking was
carried out outside the time model
If you are using a credential with the
Permanently open
function, only hold the credential in
front of the reader unit as long as the LEDs are flashing. Otherwise, the
permanently open
operating mode is activated.
3.2 Activating/deactivating the permanently open mode
IF-261 Cabinet Lock provides for
Permanently open
mode. In this operating mode, the door can be
opened without further bookings.
Activation and deactivation of the permanently open mode requires a credential that has
been activated for this function.
