2 Installation and configuration
© 2022 Interflex Datensysteme GmbH | IF-261 Cabinet Lock | 06.22
11
Additionally required tools
n
Phillips screw driver PH1
n
Flat-bladed screwdriver (if locking block has to be replaced)
n
Hexagon key 2.5 mm
Prerequisites
ü
Cabinet lock closed, bolt extended
ü
Procedure
1. Press the cover of the reader unit lightly against the bottom and turn the lower screw clockwise
inwards
until you are able to lift the cover off
2. Carefully press the light conductors down and remove the cover
3. Use needle-nose pliers to pull off the cable connector below the circuit board
4. Disassemble reader unit and lock
