Allavino WNWB-2SSFN, Instruction Manual

Page: 9 / 18

OPERATION
FOR Model: WNWR53-2SSRN, WNWR142-2SSRN AND WNWR150-2SS
Control elements
1)
“ ”
Button
To turn this unit ON and OFF, press and hold this button for approximately 3 seconds.
2)
“ ”
Button
Energy conservation button: Pressing this button for 3 seconds will turn the energy conservation mode
either ON or OFF. In this mode, the LED light display will be turned off, the
ºF/ ºC light will be on.
3)
“ ”
Button (left)
Pressing this button will increase (warm) the temperature of the upper chamber in steps of 1 ºF (or 1 ºC)
4)
“ ”
Button (left)
Pressing this button will lower (cool) the temperature of the upper chamber in steps of 1 ºF (or 1 ºC)
5) LED display
Display temperature for the upper zone.
6)
“ ”
Indicator light
Indicates that the compressor is in operation.
7)
“ºC / ºF” Indicator light
Will change as the
“
ºC / ºF” button is pressed.
8) LED display
Display temperature for the lower zone.
9)
“ ”
Button
Pressing this button will increase (warm) the temperature of the lower chamber in steps of 1 ºF (or 1 ºC)
10)
“ ”
Button
Pressing this button will lower (cool) the temperature of the upper chamber in steps of 1 ºF (or 1 ºC)
11)
“
ºC / ºF” Button
Press this button to switch the indicator light between ºC and
ºF”.
12)
“ ”
Button
Turns the interior light ON and OFF. If you use this button, the light is no longer con-trolled by the reed switch,
and remains on. (Light button deactivated when Energy conservation button is on.)
Setting the temperature

When you press the or button, the system will enter the set-up mode in the upper or lower
compartment automatically. The LED will flash and display the setting temperature.

When you press the button once, the temperature will increase or decrease by 1 ºF (or 1 ºC). If you
try to go beyond the minimum/maximum value that can be established, the display will jump to the
lowest/highest adjustable temperature value automatically. If a button is not pressed for 5 seconds,
the LED will stop flashing and the setting mode will be exited.

Temperature r ange for upper and lower compartments: The temperature setting can be adjusted from
39ºF to 64ºF (or 4 ºC to 18 ºC).