OPERATION INSTRUCTIONS
Reverse the door
These appliances have a reversible door but is delivered with the door hinged on the
right. A left-hand hinge kit comes with the unit (in the box), should you wish to
reverse the hinge on your unit.
For Models: WNWR28-1SSRN
Disconnect power before removing
doors
Unscrew 2 screws at bottom and remove the Reed switch (6),
then install (6) at top of door frame, Unscrew the screw located
underneath the door frame and the limit device (5), and
relocate it at the left end side of the door frame. The door
revolves 180 degrees.
This operation requires two persons.
Remove the decorative nails (8) from
the top left of the cabinet and install the
spare top hinge (Left) (7) at top left to
the cabinet with 3 screws.
Take out the 3 hinge screws from the
top right hinge (4) and remove it
Install the door once correctly aligned.
Open the door to a 90 degree angle, take out
the 2 screws from lower door axis (2), remove
the door (3) and the axis plate from the door.
