ALL SPAS SWIM-PRO SERIES, Owner'S Manual

Page: 13 / 52

2017 Fitness Spa
LTR20171146, Rev. D
Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
www.calspas.com
11
5 . Prime the pump .
6 . Install the filter into the filter canister.
Make sure the filter has soaked at least 30
minutes before you install it.
Test and adjust the water chemistry. See the section
on page 23 for instructions on keeping your water
clear.
7 . Adjust water chemistry .
8 . Let the spa heat up .
When the spa has finished priming, the heater will
activate. Put the cover on and let the spa heat to the
set temperature.
The system will enter the priming mode. Priming Mode
will display on the control panel. In Priming Mode, all
devices such as jets and lights are operable. Jets can be
turned on and off to help prime the pump. The system will
exit Priming Mode and go to the Main display when the
RETURN button is pressed, or after four minutes of activity.