ALL SPAS SWIM-PRO SERIES, Owner'S Manual, Page: 37 / 52

2017 Fitness Spa
LTR20171146, Rev. D
Using the Digital Media Lock
er
www.calspas.com
35
Synchronizing (Pairing) the Remote Control with the Media Locker
Before you can use the remote control with the
docking station, they need to be synchronized, or
paired. Follow the simple instructions below.
Aquatic AV AQ-DM-5UBT Media Locker
Press the red Power button on the remote.
2
1
Press and hold the Mode button
on the remote. The display on
the remote will read PAIR.
Before you begin, make sure the docking bay
is
OFF . If the red Power light inside the dock-
ing bay is on, press it once to turn it off.
3
While still holding the Mode button, press and hold the Power
button inside the docking station for five seconds.
When the remote
and docking bay
are paired, the
power button light
will turn blue.
4
If they do not pair the first time, repeat these four steps
until it is successful.
The display on
the remote will
read WELCOME
or show a mode
position such as
RADIO.
AQ-DM-5UBT
The media locker shown in this instruction
is model AQ-DM-5UBT, although this pairing
instruction can be used with earlier Aquatic AV
media lockers that use a remote control. Model
AQ-DM-3B does not require a remote and does
not need to be paired in order to function.
If you have trouble pairing the
devices:
• Re-read the instructions and follow them
carefully. You may have missed an important
detail.
• Make sure the red power light inside the docking
bay is OFF before you begin.
• PRESS and HOLD the Mode button on the
remote until it reads PAIR. Do not release the
Mode button. Do not press the Power button
inside the docking station until the remote reads
PAIR.
• Press and hold the Power button for
NO MORE
than five seconds. Otherwise, the devices will
not pair.