Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual
4
Operating Environment
Your APS System should be used in a climate-controlled environment free of dirt, dust,
excess humidity, excessive heat or electro-magnetic interference. Your APS System
should be placed on a sturdy level surface – away from sources of vibration and
excessive lighting.
Allow at least four (4) inches of clearance around the sides and back of the system for
ventilation.
Connecting power
Plug one power cable into the tower system, one into the autoloader and another one
into the printer. Plug each power cable into the proper power source and connect all
the other cables as shown in fig. 3a – 3h on the following pages.
Important
Before powering on your system, please ensure the picker (see fig.1, page 3) is in the top
position.
Please power on your APS system in the following order:
1.
Printer
2.
Tower
3.
Autoloader
.
NOTE:
For Systems w/ EnduraJet II Printer, Power ON Tower, Autoloader, Printer
Power OFF Printer, then Autoloader & Tower.
Proceed with
Drive and Printer Alignment
on page 7.
Fig. 3a
