Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual
2
You have to save your shipping materials so that if the need arises you can return your
system for service. Sending a system to All Pro Solutions without the original
packaging will void the warranty. This packaging was designed specifically for
shipping your system. Other packaging may not be as suitable. If you have already
disposed of your packaging materials, you can receive a new set from All Pro Solutions
for a fee.
Manufacturer Recommendations
Before starting to operate your system, please read the User’s M anual
entirely!
Place your system on a flat, steady surface in a climate controlled environment with
regular office light (no bright light to reflect into the system’s sensor), free of dirt,
dust, excess humidity, excessive heat or electro-magnetic interference.
Please fan the media before placing it into the Input Hopper and align it. M edia has to
slide easy on top of each other
Do not use un-expensive media because it can generate problems: media sticks
together and 2 or more discs can be loaded even if the picker it’s designed to grab just
one.
For audio duplication, please use good quality media and max 16x speed on CD
Because your system is equipped with up 24x DVD drives, use only 52x certified CD
and 16x certified DVD media.
From time to time, the drives have to be cleaned using a CD Lens cleaning Kit or
blowing air using a compressed gas duster.
The 2 shafts used by the Picker to travel up and down should be oiled from time to
time; use the multipurpose oil provided
Mounting the tower
For all systems, the tower is provided with a tower plate mounted on the bottom.
This plate will help in stabilizing the tower on the adapter (see Fig.1).
M ake sure all thumbscrews are loose, place the tower on top of the adapter matching
the blue/pink marks (see Fig.2).
Do not tighten the thumbscrews until the drive alignment operation is performed. (see
page 7)
