22
Owner’s Manual
Stopping Engine
2. Turn the engine switch to the “STOP” position.
3. Turn the fuel valve lever to the “OFF” position.
When the engine is not in use, leave the fuel valve in
the “OFF” position to prevent carburetor flooding and
to reduce the possibility of fuel leakage.
STOP
7. Move the choke lever to the “OPEN”
position.
8. Push the circuit breakers to the “ON” position.
1. Put the circuit breaker to “OFF” position.
4. Shut down the LPG cylinder fuel knob.
Note:
If you need to alternate fuel, you can change-over directly the GAS-LPG fuel
switch
while the generator is running at no-load.
Make sure the battery is connected , if the battery is out of power, you can only start
the engine by RECIOL START WITH LPG.
