All Pond Solutions ACP-1000, Instruction Manual

Page: 7 / 15

Please note: A clogged impeller is often the primary cause of all pump
faults, so it is extremely important to clean and inspect your impeller every
month to ensure it is functioning correctly and remove any debris. Keeping
the impeller clean will improve the performance of your filter and lengthen
the life of the motor. The impeller itself is a perishable part and will be
subject to wear and tear overtime. As a result, it is also very important to
replace your impeller and ceramic shaft annually.
NEVER use tap water, or soap or detergents, when cleaning your unit. Make sure
no debris is trapped inside.
Top up your aquarium tank water level from any water used and reconnect the
power cord to the mains.
TROUBLESHOOTING
No Filter Operation / Water Flow
Noisy Operation
Solutions:
Ÿ
Always ensure the power has been turned on.
Ÿ
Check that your impeller and shaft are seated correctly and not
damaged in any way.
Ÿ
Ensure the impeller is free of any type of blockage and can rotate freely
inside the motor head.
Solutions:
Ÿ
Check that your impeller and shaft are seated correctly and not
damaged in any way.
Ÿ
Ensure the impeller is free of any type of blockage and can rotate freely
inside the motor head.