FILTER REPLACEMENT
5. Insert the new authorized filter
1 Insert the new filter.
2 Push down the filter and drag the filter handle at the same time.
3 Connect the filter top cable with the filter connection terminal.
※
Water will leak from the filter connection points when the O-ring is damaged or taken off.
Carefully have the O-rings positioned correctly when a filter replacement is made.
6. Turn off the main power switch and have water inflow into the unit for 2~3
minutes, turning on the operation knob (repeat it 2 or 3 times).
※
After replacing with a new filter, initial outlet water may be dark-colored. Such
a dark-color is caused by an outflow of active carbon fines from the new filter.
The carbon fines (fine size particles) are not harmful for drinking and should
not appear after 2~3 minutes of running water through the unit when turned
off.
7. Check to ensure there is no water leakage after replacing the filter. Filter life is
automatically displayed when the unit is turned (when you insert the used filter, its
remaining life is displayed). Close the filter compartment cover.
19
AMS 4 0 0 0
AMS 4000S
Summary of Contents for AMS4000
Page 27: ...MEMO 27 AMS 4 0 0 0 AMS 4000S...
