AMS 4 0 0 0
AMS 4000S
INSTALLATION PROCEDURE
①
Select a solid flat surface with proximity to a power
supply for desired location.
②
Connect the provided 1/4
"
hose to water inlet port firmly.
- In case of one touch fitting type, have water inlet port nozzle put into the hose hole completely
(fasten the safety key thereon after the connection).
- In case of two touch fitting type, screw the nut tightly to ensure a water tight fitting.
Check Valve
(Caution:Flow Direction)
③
Connect the hose to acidic water outlet port and cut
the other end of the hose to have sufficient length to
reach the sink for draining away acidic water or for
connecting to an acidic water bucket.
(Option: Hose-fixation holder can be used for
convenience).
▶
In case the acid water outlet hose is steeped in water in a receptacle or the hose is unnecessarily long, an
outflow rate of ionized water might be suspended. For this reason, maintain a shorter hose length to allow
natural flow rate for drainage.
▶
Do not lift the acidic water outlet hose up to the height of the installed unit.
Otherwise this will hinder the water drain from the unit and may cause internal damage to the unit.
10
INSTALLATION
Summary of Contents for AMS4000
Page 27: ...MEMO 27 AMS 4 0 0 0 AMS 4000S...